Guang Xi Baisheng Light Metal Material Co.Ltd
Guang Xi Bai Sheng Light Metal Material Co.Ltd Aluminium semi-products leading manufacturer and distributor in china
Add to Cart
AA5052 ALUMINIUM PRECISION SAW PLATE
standard: GB/T3190 or EN573-3
| Material Attributes | Evaluation |
| Dimensional Stability | Good |
| Machinability | Very Good |
| Erodability | Very Good |
| Weldability (TIG/MIG/ERW/EBW) | Good/Good/Good/Very Good |
| Corrosion Resistance ( Stress cracking/Seawater/Weather) | Normal/Good/Very good |
| Highest Use Temperature ( Long term/Occasional) | 100/180X； |
| Oxidability (Technical/Decorative I | Good/Not application |
| Polishing | Very good |
| Food contact | Good |
’Evaluation rate from very good to not application (very good / good / normal / poor / not application).
Typical Mechanical Properties
| Ultimate Tensile Strength | MPa (N/mm2) | 160-220 |
| Yield Strength | MPa (N/mm2) | 60-90 |
| Elongation | As% | 20-30 |
| Brinell Hardness | HB | 45-60 |
Typical physical Properties
| Density | g/cm3 | 2.68 |
| Thermal Conductivity | W/(mk) | 130-150 |
| Electrical Conductivity | m/Qmm2 | 19-21 |
| Modulus of Elasticity | GPa | 70 |
| Coefficient of Thermal Expansion | 10 | 23.8 |
Category Torelance
| Thickness | 6mm-450mm | Tickness Torelance | 0/+1 mm (Tw 250mm) | |
| 0/+3 mm (T>250mm) | ||||
| Sawn Plate | Max.Width | 2670mm | Width Tolerance | 0/+10 mm |
| Max. Length | 6000mm | Lenghth Tolerance | 0/+10 mm | |
| Roughness | w30pm | |||
| Sawed Block | (TxWxL) | 450 x 2670 x 6000mm ( Max.Width ) 450x 1750 x 6000mm ( Max.Tickness ) | Running Stock (WxL) | 1470 x 3000mm 2500 x 3000mm |
*Other size on request.
Typical Applications
♦ Low pressure and rapid tooling
♦ Manufacturing device of semi-conductor
♦ Industrial robot
♦ Vacuum chamber
Mechanical equipment and accessories etc.
AA5083 ALUMINIUM PRECISION SAW PLATE
ASP 5083 - ALUMINIUM PRECISION SAWN PLATE
Alloy: 5083 (Meet the standard: GB/T3190 or EN573-3)
| Material Attributes | Evaluation |
| Dimensional Stability Machinability Erodability Weldability (TIG/MIG/ERW/EBW) Corrosion Resistance ( Stress cracking/Seawater/Weather) Highest Use Temperature ( Long ternrVOccasional) Oxidability (Technical/Decorative ) Polishing Food Contact | Good Very Good Very Good Good/Good/Good/Very Good Normal/Good/Very good 100/180^ Good/Not application Very good Good |
^Evaluation rate from very good to not application (very good / good I normal / poor/ not application).
Typical Mechanical Properties
| Ultimate Tensile Strength | MPa (N/mm2) | 220-300 |
| Yield Strength | MPa (N/mm2) | 110-140 |
| Elongation | A5% | 10-20 |
| Brinell Hardness | HB | 70-85 |
Typical physical Properties
| Density | g/cm3 | 2.66 |
| Thermal Conductivity | W/(mk) | 110-140 |
| Electrical Conductivity | nV Q mm2 | 16-19 |
| Modulus of Elasticity | GPa | 70 |
| Coefficient of Thermal Expansion | M0-6/K | 24.2 |
Category Torelance
| Tickness | 6mm-450mm | Tickness Torelance | 0/+1 mm (Tw 250mm) | |
| 0/+3 mm (T>250mm) | ||||
| Sawn Plate | Max.Width | 2670mm | Tickness Torelance | 0/+10 mm |
| Max. Length | 6000mm | Lenghth Tolerance | 0/+10 mm | |
| Roughness | W30" m | |||
| Sawn Block | (TxWxL) | 450 x 2670 x 6000mm ( Max.Width ) 450x 1750 x 6000mm ( Max.Tickness ) | Running Stock (WxL) | 1470 x 3000mm 2500 x 3000mm |
Other size on request.
Typical Applications
♦ Low pressure and rapid tooling
♦ Manufacturing device of semi-conductor
♦ Industrial robot
♦ Vacuum chamber
Mechanical equipment and accessories etc.